| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
STEEL, CORROSION RESISTING |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 2ND END |
| CRXX |
MEASURING METHOD AND LENGTH |
159.000 INCHES MINIMUM OVERALL AND 161.000 INCHES MAXIMUM OVERALL |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
FED WW-H-1053,CLASS S,TYPE 1,COMPOSITION A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQJX |
NOMINAL THREAD SIZE |
1.062 INCHES 2ND END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
3.380 INCHES |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| ABKV |
OUTSIDE DIAMETER |
0.830 INCHES MINIMUM AND 0.850 INCHES MAXIMUM |
| CQJX |
NOMINAL THREAD SIZE |
1.312 INCHES 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT WITH COMPRESSION SLEEVE 2ND END |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END |
| CQRB |
SEAT ANGLE |
45.0 DEGREES 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER SPIRAL INTERLOCKED CORROSION RESISTANT STEEL |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE 1ST END |
| AAJD |
THREAD CLASS |
3B 2ND END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| AARX |
INSIDE DIAMETER |
0.750 INCHES MINIMUM AND 0.765 INCHES MAXIMUM |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| ADJL |
INNER CONVEYING TUBE STYLE |
INTERLOCKED UNPACKED |