| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CMLP |
THREAD QUANTITY PER INCH |
24 1ST END |
| CQBD |
BURST TEST PRESSURE |
300.0 POUNDS PER SQUARE INCH |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| CXCY |
PART NAME ASSIGNED BY CONTROLLING AGENCY |
HOSE ASSY, NONMETALLIC-JET FUEL STARTER FUEL INLET |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
2.000 INCHES |
| AARX |
INSIDE DIAMETER |
0.188 INCHES NOMINAL |
| CRXX |
MEASURING METHOD AND LENGTH |
10.130 INCHES NOMINAL WORKING |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL MIL-H-25579 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| THSD |
THREAD SERIES DESIGNATOR |
UNS 1ST END |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQGM |
MAXIMUM OPERATING PRESSURE |
50.0 POUNDS PER SQUARE INCH |
| SUPP |
SUPPLEMENTARY FEATURES |
THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL;THE CURRENT APPROVED SOURCES; 50599 HAVE INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984;THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| CQJX |
NOMINAL THREAD SIZE |
0.438 INCHES 1ST END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 420.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AAJD |
THREAD CLASS |
3B 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CBBL |
FEATURES PROVIDED |
ELECTROSTATIC DISCHARGE CAPABILITY |
| ABKV |
OUTSIDE DIAMETER |
0.313 INCHES NOMINAL |
| FEAT |
SPECIAL FEATURES |
1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE OUTER LAYER BRAIDED CORN, NON-ASBESTOS |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
FIRE RESISTANT |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| CRDW |
HYDROSTATIC TEST PRESSURE |
150.0 POUNDS PER SQUARE INCH |
| AGAV |
END ITEM IDENTIFICATION |
AIRCRAFT, EAGLE F-15 |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |