| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
FED ZZ-H-601,GRADE 3,SIZE E 2-INCH SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ABJH |
TEMP RATING |
158.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQGM |
MAXIMUM OPERATING PRESSURE |
125.0 POUNDS PER SQUARE INCH |
| MEDA |
MEDIA FOR WHICH DESIGNED |
WATER, FRESH SINGLE RESPONSE |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
WW-C-624C,TYPE AA,STYLE 2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED TEXTILE YARN ERR-100 OR 1ST LAYER BRAIDED FABRIC ERR-100 |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER SPIRALLY WRAPPED RUBBER FABRIC ERR-100 |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING COPPER ALLOY |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
INCLUDED |
| CQBD |
BURST TEST PRESSURE |
500.0 POUNDS PER SQUARE INCH |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81348-ZZ-H-601 GOVERNMENT SPECIFICATION |
| CRDW |
HYDROSTATIC TEST PRESSURE |
250.0 POUNDS PER SQUARE INCH |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
WW-C-624C,TYPE AA,STYLE 2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, NATURAL OR RUBBER, SYNTHETIC |
| CRXX |
MEASURING METHOD AND LENGTH |
600.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL HOSE 2ND END |
| CQJX |
NOMINAL THREAD SIZE |
2.000 INCHES 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING COPPER ALLOY |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQJX |
NOMINAL THREAD SIZE |
2.000 INCHES 2ND END |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, GASKET SEAL 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL HOSE 1ST END |
| AARX |
INSIDE DIAMETER |
2.000 INCHES NOMINAL |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
OZONE RESISTANT AND WEATHERPROOF |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
3 GRADE AND 1 CLASS |
| THSD |
THREAD SERIES DESIGNATOR |
NPSH 1ST END |
| AHNC |
CONNECTION STYLE |
PLAIN 2ND END |
| THSD |
THREAD SERIES DESIGNATOR |
NPSH 2ND END |