| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CQCS |
LAYER COMPOSITION AND LOCATION |
3RD LAYER BRAIDED FABRIC ERR-100 |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED FABRIC ERR-100 |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-H-2217 GOVERNMENT SPECIFICATION |
| FEAT |
SPECIAL FEATURES |
FURISHED WITH 1 WASHER,4 1.000 IN. HOSE CLAMPS,1 1.000 IN. HOSE CLAMP UP PER,1 1.000 IN. HOSE CLAMP LOWER,2 COTTER PINS |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER HELIX COPPER COIL ERR-100 |
| CRDW |
HYDROSTATIC TEST PRESSURE |
600.0 POUNDS PER SQUARE INCH |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
4.000 INCHES |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, CHLOROPRENE |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| ABKV |
OUTSIDE DIAMETER |
1.844 INCHES NOMINAL |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL HOSE 2ND END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING NICKEL-COPPER ALLOY, QQ-N-281, CLASS A |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING NICKEL-COPPER ALLOY, QQ-N-281, CLASS A |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
1.000 INCHES 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| CRXX |
MEASURING METHOD AND LENGTH |
600.000 INCHES NOMINAL OVERALL |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, GASKET SEAL 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, CHLOROPRENE ERR-100 |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL HOSE 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
1.000 INCHES 2ND END |
| THSD |
THREAD SERIES DESIGNATOR |
NPSH 1ST END |
| AHNC |
CONNECTION STYLE |
PLAIN 2ND END |
| AARX |
INSIDE DIAMETER |
1.000 INCHES NOMINAL |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-2217 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| THSD |
THREAD SERIES DESIGNATOR |
NPSH 2ND END |