| CRDW |
HYDROSTATIC TEST PRESSURE |
4500.0 POUNDS PER SQUARE INCH |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AARX |
INSIDE DIAMETER |
0.375 INCHES NOMINAL |
| CQBD |
BURST TEST PRESSURE |
9000.0 POUNDS PER SQUARE INCH |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
OIL RESISTANT AND OZONE RESISTANT AND WEATHERPROOF |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
5.000 INCHES |
| AHNC |
CONNECTION STYLE |
INVERTED FLARE 1ST END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES 1ST END |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL PIPE 1ST END |
| CQRB |
SEAT ANGLE |
30.0 DEGREES 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
2250.0 POUNDS PER SQUARE INCH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER ERR-100 |
| ABKV |
OUTSIDE DIAMETER |
0.781 INCHES NOMINAL |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED STEEL WIRE ERR-100 |
| CRXX |
MEASURING METHOD AND LENGTH |
234.000 INCHES NOMINAL OVERALL |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE AND HYDRAULIC FLUID, WATER BASE SINGLE RESPONSE |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
1 TYPE AND A CLASS |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM |
| THSD |
THREAD SERIES DESIGNATOR |
NPTF 1ST END |
| FEAT |
SPECIAL FEATURES |
PERMANENTLY ATTACHED FITTINGS |