| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AARX |
INSIDE DIAMETER |
0.500 INCHES NOMINAL |
| CQGM |
MAXIMUM OPERATING PRESSURE |
140.0 POUNDS PER SQUARE INCH |
| ABKV |
OUTSIDE DIAMETER |
1.031 INCHES NOMINAL |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
HEAT RESISTANT |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL PIPE 2ND END |
| THSD |
THREAD SERIES DESIGNATOR |
NPT 1ST END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
ATSTEEL,CARBON,MIL-S-20166,GRADE M |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
ATSTEEL,CARBON,MIL-S-20166,GRADE M |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-16711 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES 1ST END |
| ABJH |
TEMP RATING |
400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, CHLOROPRENE |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| FEAT |
SPECIAL FEATURES |
HEATING ELEMENT ATTACHED TO EACH COUPLING 0.062 IN. DIA CABLE 7 BY 7 CONSTRUCTION,CRES STEEL WIRE,A RETURN CABLE,MIL-C-915,50 FT LG @TAPED TO HOSE ASSEMBLY,ASSEMBLY USED FOR HOT PLASTIC PAINT SPRAYING |
| THSD |
THREAD SERIES DESIGNATOR |
NPT 2ND END |
| CQBD |
BURST TEST PRESSURE |
2000.0 POUNDS PER SQUARE INCH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER POLYTETRAFLUOROETHYLENE IMPREGNATED GLASS FIBER ERR-100 |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ZINC |
| CRXX |
MEASURING METHOD AND LENGTH |
600.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES 2ND END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL PIPE 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| AHNC |
CONNECTION STYLE |
PLAIN OPTIONAL END 1ST END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ZINC |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER POLYTETRAFLUOROETHYLENE IMPREGNATED GLASS FIBER ERR-100 |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, CHLOROPRENE ERR-100 |
| CRDW |
HYDROSTATIC TEST PRESSURE |
500.0 POUNDS PER SQUARE INCH |
| AHNC |
CONNECTION STYLE |
PLAIN 2ND END |