| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 2ND END |
| ABKV |
OUTSIDE DIAMETER |
0.656 INCHES NOMINAL |
| AARX |
INSIDE DIAMETER |
0.500 INCHES NOMINAL |
| CQBD |
BURST TEST PRESSURE |
7000.0 POUNDS PER SQUARE INCH |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, AMS 5639 |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 1ST END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, AMS 5639 |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 2ND END |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| CQJX |
NOMINAL THREAD SIZE |
0.875 INCHES 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
17.875 INCHES NOMINAL WORKING |
| ZZZK |
SPECIFICATION/STANDARD DATA |
99207-J232F0177DT MANUFACTURERS SOURCE CONTROL |
| CRSM |
VACUUM IN TORR |
50.8 |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 2ND END |
| FEAT |
SPECIAL FEATURES |
POLYTETRAFLUOROETHYLENE CHAFING SLEEVE |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL MIL-H-27267,SIZE 10 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
0.875 INCHES 2ND END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
5.500 INCHES |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1500.0 POUNDS PER SQUARE INCH |
| CBBL |
FEATURES PROVIDED |
ELECTROSTATIC DISCHARGE CAPABILITY |
| CRDW |
HYDROSTATIC TEST PRESSURE |
3000.0 POUNDS PER SQUARE INCH |
| CMLP |
THREAD QUANTITY PER INCH |
14 2ND END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| AAJP |
OUTSIDE SURFACE TREATMENT |
PASSIVATED |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| AAJD |
THREAD CLASS |
3B 2ND END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |