| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 2ND END |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 2ND END |
| ADJS |
EXTERIOR COLOR |
NATURAL |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, AMS 5639 |
| AGAV |
END ITEM IDENTIFICATION |
AIRCRAFT, STRATOLIFTER C-135 |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, AMS 5639 |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL MIL-H-27267,SIZE 4 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| SUPP |
SUPPLEMENTARY FEATURES |
THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCE, 00624, HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| ZZZK |
SPECIFICATION/STANDARD DATA |
73342-6854415 MANUFACTURERS SOURCE CONTROL |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
2.000 INCHES |
| AARX |
INSIDE DIAMETER |
0.188 INCHES NOMINAL |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| CRSM |
VACUUM IN TORR |
50.8 |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 2ND END |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQBD |
BURST TEST PRESSURE |
12000.0 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
0.438 INCHES 1ST END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1500.0 POUNDS PER SQUARE INCH |
| CRDW |
HYDROSTATIC TEST PRESSURE |
3000.0 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| CQJX |
NOMINAL THREAD SIZE |
0.438 INCHES 2ND END |
| AAJP |
OUTSIDE SURFACE TREATMENT |
PASSIVATED |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CRXX |
MEASURING METHOD AND LENGTH |
10.000 INCHES NOMINAL WORKING |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| FEAT |
SPECIAL FEATURES |
WEAPON SYSTEM ESSENTIAL |
| AAJD |
THREAD CLASS |
3B 2ND END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRTL |
CRITICALITY CODE JUSTIFICATION |
FEAT |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ABKV |
OUTSIDE DIAMETER |
0.312 INCHES NOMINAL |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ACID RESISTANT AND OXIDATION RESISTANT AND OIL RESISTANT AND FUEL RESISTANT AND ETHYLENE GLYCOL RESISTANT AND ALCOHOL RESISTANT AND WATERPROOF |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |