| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
3.000 INCHES |
| THSD |
THREAD SERIES DESIGNATOR |
NPTF 2ND END |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
OIL RESISTANT AND WEATHERPROOF |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER WOVEN RAYON CORD ERR-100 |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| ABKV |
OUTSIDE DIAMETER |
0.562 INCHES NOMINAL |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL PIPE 2ND END |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
INCLUDED |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES 2ND END |
| AHNC |
CONNECTION STYLE |
INVERTED FLARE 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER WOVEN RAYON CORD ERR-100 |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, SYNTHETIC ERR-100 |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING BRASS |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1250.0 POUNDS PER SQUARE INCH |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PHOSPHATE |
| CQBD |
BURST TEST PRESSURE |
5000.0 POUNDS PER SQUARE INCH |
| AARX |
INSIDE DIAMETER |
0.250 INCHES NOMINAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL PIPE 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
SAE J517,100R3-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CQRB |
SEAT ANGLE |
30.0 DEGREES 2ND END |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, GASKET SEAL 1ST END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING BRASS |
| THSD |
THREAD SERIES DESIGNATOR |
NPTF 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
15.000 INCHES NOMINAL OVERALL |