| CRDW |
HYDROSTATIC TEST PRESSURE |
4500.0 POUNDS PER SQUARE INCH |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKV |
OUTSIDE DIAMETER |
1.219 INCHES MINIMUM AND 1.281 INCHES MAXIMUM |
| CQBD |
BURST TEST PRESSURE |
9000.0 POUNDS PER SQUARE INCH |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
1.062 INCHES 1ST END |
| MARK |
SPECIAL MARKINGS |
TWO BAND MARKERS STAMPED W/CIRCUIT NO. 123 |
| CRXX |
MEASURING METHOD AND LENGTH |
35.000 INCHES NOMINAL OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UN 1ST END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
5.000 INCHES |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, BUNA-N |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
ARMY ENGINEER RESEARCH AND DEVELOPMENT LABORATORIES 13208E6819-2 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER BRAIDED STEEL WIRE ERR-100 |
| AARX |
INSIDE DIAMETER |
0.735 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| CQGM |
MAXIMUM OPERATING PRESSURE |
2250.0 POUNDS PER SQUARE INCH |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED STEEL WIRE ERR-100 |
| CMLP |
THREAD QUANTITY PER INCH |
12 1ST END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
MILDEW RESISTANT AND OIL RESISTANT AND OIL RESISTANT |
| AAJD |
THREAD CLASS |
2B 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM, QQ-P-416, TYPE 2, CLASS 3 OR COMPLETE FITTING ZINC, QQ-Z-325, TYPE 2, CLASS 3 |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, CHLOROPRENE ERR-100 |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING CADMIUM QQ-P-416 TYPE 2 CLASS 3, ZINC QQ-Z-325 TYPE 2 CLASS 3 |