| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CRDW |
HYDROSTATIC TEST PRESSURE |
5500.0 POUNDS PER SQUARE INCH |
| ABKV |
OUTSIDE DIAMETER |
0.594 INCHES MINIMUM AND 0.656 INCHES MAXIMUM |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM, QQ-P-416, TYPE 2, CLASS 3 OR COMPLETE FITTING ZINC, QQ-Z-325, TYPE 2, CLASS 2 |
| AARX |
INSIDE DIAMETER |
0.242 INCHES MINIMUM AND 0.273 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
NPTF 2ND END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
2750.0 POUNDS PER SQUARE INCH |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL PIPE 2ND END |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
ARMY ENGINEER RESEARCH AND DEVELOPMENT LABORATORIES 13215E7641-1 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
4.000 INCHES |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES 2ND END |
| AHNC |
CONNECTION STYLE |
INVERTED FLARE 2ND END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQJX |
NOMINAL THREAD SIZE |
0.438 INCHES 1ST END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, BUNA-N |
| MARK |
SPECIAL MARKINGS |
TWO BAND MARKERS STAMPED W/CIRCUIT NO. 201GG |
| CBBL |
FEATURES PROVIDED |
PERFORATED OUTER COVER |
| CQRB |
SEAT ANGLE |
45.0 DEGREES 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END |
| CQBD |
BURST TEST PRESSURE |
11000.0 POUNDS PER SQUARE INCH |
| CRXX |
MEASURING METHOD AND LENGTH |
32.000 INCHES NOMINAL OVERALL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED STEEL WIRE ERR-100 |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM, QQ-P-416, TYPE 2, CLASS 3 OR COMPLETE FITTING ZINC, QQ-Z-325, TYPE 2, CLASS 2 |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
ARMY ENGINEER RESEARCH AND DEVELOPMENT LABORATORIES 13215E7642-6 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
MILDEW RESISTANT AND OIL RESISTANT AND OIL RESISTANT |
| CQRB |
SEAT ANGLE |
30.0 DEGREES 2ND END |
| AAJD |
THREAD CLASS |
2B 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, CHLOROPRENE ERR-100 |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |