| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
ERR-070 |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 1ST END |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
ERR-070 |
| CQBD |
BURST TEST PRESSURE |
1200.0 POUNDS PER SQUARE INCH |
| ABKU |
FLANGE THICKNESS |
0.297 INCHES NOMINAL 1ST END |
| CTCJ |
FLANGE STYLE |
RECTANGULAR (INCLUDES SQUARE) 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
37.750 INCHES MINIMUM WORKING AND 38.250 INCHES MAXIMUM WORKING |
| ABKU |
FLANGE THICKNESS |
0.297 INCHES NOMINAL 2ND END |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
1.656 INCHES NOMINAL 1ST END |
| AARX |
INSIDE DIAMETER |
0.937 INCHES NOMINAL |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
1.312 INCHES NOMINAL 2ND END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
600.0 POUNDS PER SQUARE INCH |
| AJEE |
RAISED FACE DIAMETER |
1.854 INCHES NOMINAL 1ST END |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
1.312 INCHES NOMINAL 2ND END |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 2ND END |
| CTCJ |
FLANGE STYLE |
RECTANGULAR (INCLUDES SQUARE) 2ND END |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 1ST END |
| SUPP |
SUPPLEMENTARY FEATURES |
THIS ITEM HAS BEEN REVIEWED FOR ASBESTOS MATERIAL. THE CURRENT APPROVED SOURCE, 1P322, HAS INDICATED THEIR PART NUMBER CONTAINED ASBESTOS PRIOR TO 1984. THEY CONTINUE TO MANUFACTURE THE SAME PART NUMBER WITHOUT ASBESTOS MATERIAL AFTER 1984 |
| CQGM |
MAXIMUM OPERATING PRESSURE |
300.0 POUNDS PER SQUARE INCH |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
5.000 INCHES |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| AWLS |
CONNECTION TYPE |
RAISED FACE FLANGE 1ST END |
| AHNX |
BOLT HOLE DIAMETER |
0.266 INCHES MINIMUM 1ST END AND 0.276 INCHES MAXIMUM 1ST END |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| AFQN |
FLANGE LENGTH |
1.750 INCHES NOMINAL 2ND END |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AWLS |
CONNECTION TYPE |
RAISED FACE FLANGE 2ND END |
| ADKX |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG |
233.0 |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END |
| AFQN |
FLANGE LENGTH |
2.188 INCHES NOMINAL 1ST END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
ERR-070 |
| AHNX |
BOLT HOLE DIAMETER |
0.266 INCHES MINIMUM 2ND END AND 0.276 INCHES MAXIMUM 2ND END |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
ERR-070 OR ERR-070 |
| AAJP |
OUTSIDE SURFACE TREATMENT |
PASSIVATED |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AJED |
RAISED FACE HEIGHT |
0.015 INCHES NOMINAL 1ST END |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
1.656 INCHES NOMINAL 1ST END |
| AJED |
RAISED FACE HEIGHT |
0.015 INCHES NOMINAL 2ND END |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
MS20756-16D STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AECS |
BOLT HOLE QUANTITY |
4 1ST END |
| AGFF |
FLANGE WIDTH |
2.188 INCHES NOMINAL 1ST END |
| AECS |
BOLT HOLE QUANTITY |
4 2ND END |
| AGFF |
FLANGE WIDTH |
1.750 INCHES NOMINAL 2ND END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
ERR-070 |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
ERR-070 OR ERR-070 |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
MS20756-20D STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AJEE |
RAISED FACE DIAMETER |
1.510 INCHES NOMINAL 2ND END |
| ABKV |
OUTSIDE DIAMETER |
1.312 INCHES NOMINAL |
| AHNC |
CONNECTION STYLE |
RAISED SWIVEL 1ST END |
| CRWL |
INSIDE SURFACE CONDITION |
CONVOLUTED |
| AHNC |
CONNECTION STYLE |
RAISED SWIVEL 2ND END |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 350.0 DEG FAHRENHEIT SINGLE RESPONSE |