| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 160.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ABRASION RESISTANT AND OIL RESISTANT |
| CQCS |
LAYER COMPOSITION AND LOCATION |
3RD LAYER RUBBER IMPREGNATED COTTON FABRIC ERR-100 |
| MEDA |
MEDIA FOR WHICH DESIGNED |
HYDRAULIC FLUID, PHOSPHATE-ESTER BASE SINGLE RESPONSE |
| CQGM |
MAXIMUM OPERATING PRESSURE |
3000.0 POUNDS PER SQUARE INCH |
| CQBD |
BURST TEST PRESSURE |
14000.0 POUNDS PER SQUARE INCH |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER RUBBER IMPREGNATED COTTON FABRIC ERR-100 |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CRXX |
MEASURING METHOD AND LENGTH |
21.500 INCHES NOMINAL WORKING |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER BRAIDED STEEL WIRE ERR-100 |
| CBBL |
FEATURES PROVIDED |
ELECTROSTATIC DISCHARGE CAPABILITY |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
4TH LAYER BRAIDED STEEL WIRE ERR-100 |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
5.750 INCHES |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER ERR-100 |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
7000.0 POUNDS PER SQUARE INCH |
| ABKV |
OUTSIDE DIAMETER |
0.828 INCHES MINIMUM AND 0.890 INCHES MAXIMUM |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CQJX |
NOMINAL THREAD SIZE |
0.750 INCHES 1ST END |
| AARX |
INSIDE DIAMETER |
0.430 INCHES MINIMUM AND 0.462 INCHES MAXIMUM |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS28759 GOVERNMENT STANDARD |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
MS28760 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-8788 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |