| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1000.0 POUNDS PER SQUARE INCH |
| ABKV |
OUTSIDE DIAMETER |
1.141 INCHES NOMINAL |
| ABKG |
BOLT CIRCLE DIAMETER |
1.855 INCHES NOMINAL 2ND END |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ANODIZED |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 2ND END |
| CTCJ |
FLANGE STYLE |
ROUND W/ BOLT HOLES 1ST END |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| CTCJ |
FLANGE STYLE |
ROUND W/ BOLT HOLES 2ND END |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ABKG |
BOLT CIRCLE DIAMETER |
2.562 INCHES NOMINAL 1ST END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING ALUMINUM ALLOY |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| AWLS |
CONNECTION TYPE |
PLAIN FACE FLANGE 1ST END |
| CQBD |
BURST TEST PRESSURE |
2500.0 POUNDS PER SQUARE INCH |
| AWLS |
CONNECTION TYPE |
PLAIN FACE FLANGE 2ND END |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ANODIZED |
| AHNX |
BOLT HOLE DIAMETER |
0.281 INCHES NOMINAL 2ND END |
| AECS |
BOLT HOLE QUANTITY |
4 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
19.625 INCHES NOMINAL WORKING |
| AHNX |
BOLT HOLE DIAMETER |
0.266 INCHES NOMINAL 1ST END |
| AECS |
BOLT HOLE QUANTITY |
4 2ND END |
| AARX |
INSIDE DIAMETER |
0.875 INCHES NOMINAL |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING ALUMINUM ALLOY |
| CRDW |
HYDROSTATIC TEST PRESSURE |
1250.0 POUNDS PER SQUARE INCH |
| AHNC |
CONNECTION STYLE |
PLAIN 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| CRFY |
FLOW ANGLE |
67.5 DEGREES 1ST END |
| AHNC |
CONNECTION STYLE |
PLAIN 2ND END |