| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AHNX |
BOLT HOLE DIAMETER |
0.205 INCHES NOMINAL 1ST END |
| AHNX |
BOLT HOLE DIAMETER |
0.205 INCHES NOMINAL 2ND END |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-27267 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 1ST END |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
1.312 INCHES NOMINAL 1ST END |
| CTCJ |
FLANGE STYLE |
RECTANGULAR (INCLUDES SQUARE) 1ST END |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
1.312 INCHES NOMINAL 2ND END |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
1.312 INCHES NOMINAL 1ST END |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
1.312 INCHES NOMINAL 2ND END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
7.375 INCHES |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 2ND END |
| CTCJ |
FLANGE STYLE |
RECTANGULAR (INCLUDES SQUARE) 2ND END |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| AWLS |
CONNECTION TYPE |
RAISED FACE FLANGE 1ST END |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
INCLUDED |
| AFQN |
FLANGE LENGTH |
1.750 INCHES NOMINAL 1ST END |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| AFQN |
FLANGE LENGTH |
1.750 INCHES NOMINAL 2ND END |
| AJED |
RAISED FACE HEIGHT |
0.030 INCHES NOMINAL 1ST END |
| AWLS |
CONNECTION TYPE |
RAISED FACE FLANGE 2ND END |
| AJED |
RAISED FACE HEIGHT |
0.030 INCHES NOMINAL 2ND END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1250.0 POUNDS PER SQUARE INCH |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END |
| CRFY |
FLOW ANGLE |
45.0 DEGREES 1ST END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
ERR-070 |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
ERR-070 OR ERR-070 |
| CRDW |
HYDROSTATIC TEST PRESSURE |
2500.0 POUNDS PER SQUARE INCH |
| ABKV |
OUTSIDE DIAMETER |
1.109 INCHES NOMINAL |
| CQBD |
BURST TEST PRESSURE |
5000.0 POUNDS PER SQUARE INCH |
| AECS |
BOLT HOLE QUANTITY |
4 1ST END |
| AGFF |
FLANGE WIDTH |
1.750 INCHES NOMINAL 1ST END |
| AECS |
BOLT HOLE QUANTITY |
4 2ND END |
| AARX |
INSIDE DIAMETER |
0.875 INCHES NOMINAL |
| AGFF |
FLANGE WIDTH |
1.750 INCHES NOMINAL 2ND END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
ERR-070 |
| AHNC |
CONNECTION STYLE |
RAISED 1ST END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AJEE |
RAISED FACE DIAMETER |
1.510 INCHES NOMINAL 1ST END |
| ADKX |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG |
350.0 |
| ABJH |
TEMP RATING |
-100.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AJEE |
RAISED FACE DIAMETER |
1.510 INCHES NOMINAL 2ND END |
| AHNC |
CONNECTION STYLE |
RAISED 2ND END |
| ABKU |
FLANGE THICKNESS |
0.234 INCHES NOMINAL 1ST END |
| ABKU |
FLANGE THICKNESS |
0.234 INCHES NOMINAL 2ND END |
| CRXX |
MEASURING METHOD AND LENGTH |
21.000 INCHES NOMINAL OVERALL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
MS20756 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |