| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL MIL-H-3992,TYPE 1,CLASS 1 OR 2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING BRASS, QQ-B-626, ALLOY 360, 1/2H |
| AARX |
INSIDE DIAMETER |
0.375 INCHES NOMINAL |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
1.750 INCHES |
| AWLS |
CONNECTION TYPE |
GLAD HAND QUICK DISCONNECT 2ND END |
| CQJX |
NOMINAL THREAD SIZE |
0.500 INCHES 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
69.750 INCHES NOMINAL OVERALL |
| CRSM |
VACUUM IN TORR |
50.8 |
| AHNC |
CONNECTION STYLE |
INVERTED FLARE 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER BRAIDED TEXTILE YARN ERR-100 |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
MS35746-1 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING BRASS, QQ-B-626, ALLOY 360, 1/2H |
| CQGM |
MAXIMUM OPERATING PRESSURE |
225.0 POUNDS PER SQUARE INCH |
| MEDA |
MEDIA FOR WHICH DESIGNED |
AIR SINGLE RESPONSE |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ABRASION RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND OZONE RESISTANT AND COLD RESISTANT |
| ABKV |
OUTSIDE DIAMETER |
0.750 INCHES NOMINAL |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL PIPE 1ST END |
| CQRB |
SEAT ANGLE |
30.0 DEGREES 1ST END |
| ADJS |
EXTERIOR COLOR |
BLACK |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED TEXTILE YARN ERR-100 |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AHNC |
CONNECTION STYLE |
GLADHAND 2ND END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
MS39133-2 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CRDW |
HYDROSTATIC TEST PRESSURE |
450.0 POUNDS PER SQUARE INCH |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, CHLOROPRENE ERR-100 |
| THSD |
THREAD SERIES DESIGNATOR |
NPTF 1ST END |
| CQBD |
BURST TEST PRESSURE |
900.0 POUNDS PER SQUARE INCH |
| CQQN |
EXTERNAL PROTECTION TYPE AND LOCATION |
BOTH ENDS SPRING GUARD, FLAT STEEL COIL |