| ADLG |
FIRST END FITTING SPEC/STD DATA |
MIL MS27025-17 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| MARK |
SPECIAL MARKINGS |
LIQUID FUEL |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, BUTADIENE ACRYLONITRILE |
| AARX |
INSIDE DIAMETER |
4.000 INCHES NOMINAL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD ERR-100 |
| ADLP |
QUICK DISCONNECT NOMINAL SIZE |
4.000 INCHES 1ST END |
| ADLP |
QUICK DISCONNECT NOMINAL SIZE |
4.000 INCHES 2ND END |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
9 SIZE |
| CQBD |
BURST TEST PRESSURE |
500.0 POUNDS PER SQUARE INCH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, SYNTHETIC ERR-100 |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AWLS |
CONNECTION TYPE |
INTERNAL QUICK DISCONNECT 1ST END |
| AHNC |
CONNECTION STYLE |
CAM OR LEVER (EXTERNAL) 2ND END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING ALUMINUM ALLOY |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
FUEL RESISTANT AND OIL RESISTANT AND OZONE RESISTANT AND WATER RESISTANT AND ABRASION RESISTANT AND SALT WATER RESISTANT |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
MIL MS27021-17 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-PRF-370 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CBBL |
FEATURES PROVIDED |
ELECTROSTATIC DISCHARGE CAPABILITY |
| ADJS |
EXTERIOR COLOR |
BLACK |
| ABKV |
OUTSIDE DIAMETER |
4.750 INCHES NOMINAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AHNC |
CONNECTION STYLE |
CAM OR LEVER (INTERNAL) 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER SPIRALLY WRAPPED STEEL FABRIC ERR-100 |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING ALUMINUM ALLOY, QQ-A-601, ALLOY 356, TEMPER T6 |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AWLS |
CONNECTION TYPE |
EXTERNAL QUICK DISCONNECT 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CRDW |
HYDROSTATIC TEST PRESSURE |
150.0 POUNDS PER SQUARE INCH |
| ABJH |
TEMP RATING |
-32.0 DEG CELSIUS SINGLE RESPONSE AND 52.0 DEG CELSIUS SINGLE RESPONSE |
| FEAT |
SPECIAL FEATURES |
FEMALE END SUPPLIED W/ONE MS27030-9 GASKET AND ONE MS27029-17 DUST PLUG |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-PRF-370 GOVERNMENT SPECIFICATION |
| CRXX |
MEASURING METHOD AND LENGTH |
300.000 INCHES NOMINAL EXCLUDING END FITTINGS |