| ADLF |
HOSE OR TUBING SPEC/STD DATA |
QQ-N-281,CLASS A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQBD |
BURST TEST PRESSURE |
5550.0 POUNDS PER SQUARE INCH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ADJL |
INNER CONVEYING TUBE STYLE |
ANNULAR CLOSE-PITCH CORRUGATED |
| ABJH |
TEMP RATING |
800.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 1ST END |
| FEAT |
SPECIAL FEATURES |
ITEM CONSISTS OF TWO IDENTICAL HOSE ASSEMBLIES JOINED BY A 90.0 DEG ELBOW,EACH LEG HAVING A LENGTH OF 16.000 IN. |
| ABKG |
BOLT CIRCLE DIAMETER |
2.750 INCHES NOMINAL 1ST END |
| CTCJ |
FLANGE STYLE |
ROUND W/ BOLT HOLES 1ST END |
| AWLS |
CONNECTION TYPE |
RAISED FACE FLANGE 1ST END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| AEPR |
FLANGE OUTSIDE DIAMETER |
3.875 INCHES NOMINAL 1ST END |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
NICKEL-COPPER ALLOY, QQ-N-281, CLASS A |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED NICKEL COPPER ALLOY WIRE ERR-100 |
| AHNX |
BOLT HOLE DIAMETER |
0.625 INCHES NOMINAL 1ST END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
2500.0 POUNDS PER SQUARE INCH |
| AJED |
RAISED FACE HEIGHT |
0.015 INCHES NOMINAL 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
32.000 INCHES NOMINAL OVERALL |
| ABKV |
OUTSIDE DIAMETER |
1.430 INCHES NOMINAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AECS |
BOLT HOLE QUANTITY |
4 1ST END |
| AJEE |
RAISED FACE DIAMETER |
1.500 INCHES NOMINAL 1ST END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
8.000 INCHES |
| AHNC |
CONNECTION STYLE |
RAISED 1ST END |
| AARX |
INSIDE DIAMETER |
0.750 INCHES NOMINAL |
| CBBL |
FEATURES PROVIDED |
IDENTICAL ENDS |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED NICKEL COPPER ALLOY WIRE ERR-100 |
| ABKU |
FLANGE THICKNESS |
0.500 INCHES NOMINAL 1ST END |