| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CMLP |
THREAD QUANTITY PER INCH |
7-1/2 1ST END |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
WW-C-624,TYPE AA,STYLE 3 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CRDW |
HYDROSTATIC TEST PRESSURE |
100.0 POUNDS PER SQUARE INCH |
| AARX |
INSIDE DIAMETER |
2.500 INCHES NOMINAL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED COTTON CORD ERR-100 OR 1ST LAYER BRAIDED FABRIC ERR-100 |
| THSD |
THREAD SERIES DESIGNATOR |
NH 1ST END |
| ABKV |
OUTSIDE DIAMETER |
3.063 INCHES NOMINAL |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING BRASS |
| CRXX |
MEASURING METHOD AND LENGTH |
480.000 INCHES NOMINAL OVERALL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, SYNTHETIC ERR-100 |
| CQJX |
NOMINAL THREAD SIZE |
2.500 INCHES 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER HELIX STEEL COIL ERR-100 |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
15.000 INCHES |
| CBBL |
FEATURES PROVIDED |
ELECTROSTATIC DISCHARGE CAPABILITY |
| MEDA |
MEDIA FOR WHICH DESIGNED |
WATER SINGLE RESPONSE |
| CQCS |
LAYER COMPOSITION AND LOCATION |
3RD LAYER BRAIDED COTTON CORD ERR-100 OR 3RD LAYER BRAIDED FABRIC ERR-100 |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
OIL RESISTANT AND OZONE RESISTANT |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, GASKET SEAL 1ST END |
| CRSM |
VACUUM IN TORR |
254.0 |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL HOSE 1ST END |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
ZZ-H-561,GRADE A,TYPE 2,STYLE A,CLASS 1 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |