| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-13791 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CMLP |
THREAD QUANTITY PER INCH |
24 1ST END AND 18 1ST END |
| ABKV |
OUTSIDE DIAMETER |
0.469 INCHES MINIMUM AND 0.500 INCHES MAXIMUM |
| AARX |
INSIDE DIAMETER |
0.125 INCHES NOMINAL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD ERR-100 |
| CRXX |
MEASURING METHOD AND LENGTH |
17.344 INCHES NOMINAL OVERALL |
| CQRB |
SEAT ANGLE |
42.0 DEGREES 1ST END |
| AHNC |
CONNECTION STYLE |
INVERTED FLARE 1ST END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, CHLOROPRENE |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD ERR-100 |
| TEST |
TEST DATA DOCUMENT |
63477-FE52380 TO FE52399 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| THSD |
THREAD SERIES DESIGNATOR |
UNS 1ST END AND UNF 1ST END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END AND RIGHT-HAND 1ST END |
| ADJS |
EXTERIOR COLOR |
BLACK |
| CQBD |
BURST TEST PRESSURE |
5000.0 POUNDS PER SQUARE INCH |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
4000.0 POUNDS PER SQUARE INCH |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL AND EXTERNAL TUBE 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM, QQ-P-416, TYPE 2, CLASS 3 OR COMPLETE FITTING ZINC, QQ-Z-325, TYPE 2, CLASS 3 |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, CHLOROPRENE ERR-100 |
| CQJX |
NOMINAL THREAD SIZE |
0.437 INCHES 1ST END AND 0.625 INCHES 1ST END |
| AAJD |
THREAD CLASS |
2B 1ST END AND 2A 1ST END |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ABRASION RESISTANT AND OIL RESISTANT AND MILDEW RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND OZONE RESISTANT |