| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AEPR |
FLANGE OUTSIDE DIAMETER |
2.812 INCHES NOMINAL 2ND END |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRDW |
HYDROSTATIC TEST PRESSURE |
5000.0 POUNDS PER SQUARE INCH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED COTTON CORD ERR-100 |
| CRXX |
MEASURING METHOD AND LENGTH |
31.000 INCHES NOMINAL WORKING |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
5TH LAYER SPIRALLY LAID STEEL WIRE ERR-100 |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER SPIRALLY LAID STEEL WIRE ERR-100 |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 2ND END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
2500.0 POUNDS PER SQUARE INCH |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ABRASION RESISTANT AND OIL RESISTANT AND WEATHERPROOF |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-H-52471 GOVERNMENT SPECIFICATION |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, CHLOROPRENE |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQBD |
BURST TEST PRESSURE |
10000.0 POUNDS PER SQUARE INCH |
| CTCJ |
FLANGE STYLE |
ROUND W/ OUT BOLT HOLES 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
3RD LAYER SPIRALLY LAID STEEL WIRE ERR-100 |
| AHNC |
CONNECTION STYLE |
PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 1ST END |
| CTCJ |
FLANGE STYLE |
ROUND W/ OUT BOLT HOLES 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
4TH LAYER SPIRALLY LAID STEEL WIRE ERR-100 |
| CBBL |
FEATURES PROVIDED |
ELECTROSTATIC DISCHARGE CAPABILITY |
| AHNC |
CONNECTION STYLE |
PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 2ND END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| AWLS |
CONNECTION TYPE |
PLAIN FACE FLANGE 1ST END |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
MIL MS39288-32C STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM |
| AWLS |
CONNECTION TYPE |
PLAIN FACE FLANGE 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER ERR-100 |
| AARX |
INSIDE DIAMETER |
1.750 INCHES NOMINAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
C TYPE |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
MIL MS39286-32C STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM |
| ABKU |
FLANGE THICKNESS |
0.370 INCHES NOMINAL 1ST END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
7.000 INCHES |
| ABKU |
FLANGE THICKNESS |
0.370 INCHES NOMINAL 2ND END |
| AEPR |
FLANGE OUTSIDE DIAMETER |
2.812 INCHES NOMINAL 1ST END |
| ABKV |
OUTSIDE DIAMETER |
2.781 INCHES NOMINAL |