| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CRDW |
HYDROSTATIC TEST PRESSURE |
5500.0 POUNDS PER SQUARE INCH |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, BUTADIENE ACRYLONITRILE |
| CQGM |
MAXIMUM OPERATING PRESSURE |
2750.0 POUNDS PER SQUARE INCH |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
4.000 INCHES |
| AHNC |
CONNECTION STYLE |
INVERTED FLARE 1ST END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQJX |
NOMINAL THREAD SIZE |
0.125 INCHES 1ST END |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
MILDEW RESISTANT AND OIL RESISTANT AND COLD RESISTANT AND OZONE RESISTANT |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL PIPE 1ST END |
| CBBL |
FEATURES PROVIDED |
ELECTROSTATIC DISCHARGE CAPABILITY |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-H-13531 GOVERNMENT SPECIFICATION |
| CQRB |
SEAT ANGLE |
30.0 DEGREES 1ST END |
| CQBD |
BURST TEST PRESSURE |
11000.0 POUNDS PER SQUARE INCH |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM, QQ-P-416, TYPE 2, CLASS 3 OR COMPLETE FITTING ZINC, QQ-Z-325, TYPE 2, CHROMATE TREATED |
| CRXX |
MEASURING METHOD AND LENGTH |
24.500 INCHES NOMINAL OVERALL |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| AARX |
INSIDE DIAMETER |
0.250 INCHES NOMINAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED STEEL WIRE ERR-100 |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
I TYPE AND A CLASS |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-13531,TYPE 1,CLASS A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ABKV |
OUTSIDE DIAMETER |
0.625 INCHES NOMINAL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, CHLOROPRENE ERR-100 |
| THSD |
THREAD SERIES DESIGNATOR |
NPTF 1ST END |