| AFQN |
FLANGE LENGTH |
1.594 INCHES NOMINAL 1ST END |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CRXX |
MEASURING METHOD AND LENGTH |
28.000 INCHES NOMINAL WORKING |
| AHNX |
BOLT HOLE DIAMETER |
0.205 INCHES NOMINAL 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1000.0 POUNDS PER SQUARE INCH |
| AHNX |
BOLT HOLE DIAMETER |
0.205 INCHES NOMINAL 2ND END |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 1ST END |
| ABKU |
FLANGE THICKNESS |
0.297 INCHES NOMINAL 1ST END |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
1.156 INCHES NOMINAL 1ST END |
| CTCJ |
FLANGE STYLE |
RECTANGULAR (INCLUDES SQUARE) 1ST END |
| AFQN |
FLANGE LENGTH |
1.594 INCHES NOMINAL 2ND END |
| ABKU |
FLANGE THICKNESS |
0.297 INCHES NOMINAL 2ND END |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
1.156 INCHES NOMINAL 2ND END |
| AHNC |
CONNECTION STYLE |
PLAIN SWIVEL 1ST END |
| AHNC |
CONNECTION STYLE |
PLAIN SWIVEL 2ND END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 2ND END |
| CTCJ |
FLANGE STYLE |
RECTANGULAR (INCLUDES SQUARE) 2ND END |
| ABKV |
OUTSIDE DIAMETER |
0.758 INCHES MINIMUM AND 0.812 INCHES MAXIMUM |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CRDW |
HYDROSTATIC TEST PRESSURE |
2000.0 POUNDS PER SQUARE INCH |
| AARX |
INSIDE DIAMETER |
0.610 INCHES MINIMUM AND 0.640 INCHES MAXIMUM |
| CRFY |
FLOW ANGLE |
45.0 DEGREES 2ND END |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
1.156 INCHES NOMINAL 1ST END |
| CBBL |
FEATURES PROVIDED |
ELECTROSTATIC DISCHARGE CAPABILITY |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| AWLS |
CONNECTION TYPE |
PLAIN FACE FLANGE 1ST END |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
1.156 INCHES NOMINAL 2ND END |
| AAJP |
OUTSIDE SURFACE TREATMENT |
PASSIVATED |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| AWLS |
CONNECTION TYPE |
PLAIN FACE FLANGE 2ND END |
| AGFF |
FLANGE WIDTH |
1.594 INCHES NOMINAL 1ST END |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| AGFF |
FLANGE WIDTH |
1.594 INCHES NOMINAL 2ND END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AECS |
BOLT HOLE QUANTITY |
4 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| AECS |
BOLT HOLE QUANTITY |
4 2ND END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| CQBD |
BURST TEST PRESSURE |
6000.0 POUNDS PER SQUARE INCH |