| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ADJS |
EXTERIOR COLOR |
NATURAL |
| CRSM |
VACUUM IN TORR |
406.4 |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
7.375 INCHES |
| CBBL |
FEATURES PROVIDED |
ELECTROSTATIC DISCHARGE CAPABILITY AND NUTS DRILLED FOR LOCKWIRE AND REUSABLE END FITTINGS |
| CQQN |
EXTERNAL PROTECTION TYPE AND LOCATION |
OVERALL FIRE SHIELD, BUTYL RUBBER COATED ASBESTOS BRAID |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-27267-16Z SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1250.0 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
1.312 INCHES 1ST END |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 275.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AAJD |
THREAD CLASS |
3B 1ST END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
2500.0 POUNDS PER SQUARE INCH |
| AAJP |
OUTSIDE SURFACE TREATMENT |
PASSIVATED |
| ABKV |
OUTSIDE DIAMETER |
1.109 INCHES NOMINAL |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
MIL-F-27272 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQBD |
BURST TEST PRESSURE |
5000.0 POUNDS PER SQUARE INCH |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-H-25579 GOVERNMENT SPECIFICATION |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
2 CLASS |
| CMLP |
THREAD QUANTITY PER INCH |
12 1ST END |
| AARX |
INSIDE DIAMETER |
0.875 INCHES NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJ 1ST END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
COLD RESISTANT AND CORROSION RESISTANT AND FUEL RESISTANT |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
15.000 INCHES NOMINAL OVERALL |