| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL TUBE 2ND END |
| CRXX |
MEASURING METHOD AND LENGTH |
29.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AARX |
INSIDE DIAMETER |
0.500 INCHES NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 2ND END |
| AAJD |
THREAD CLASS |
1A 2ND END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
3000.0 POUNDS PER SQUARE INCH |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM OR COMPLETE FITTING ZINC |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
3RD LAYER BRAIDED COTTON CORD ERR-100 |
| CQJX |
NOMINAL THREAD SIZE |
0.875 INCHES 1ST END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ABRASION RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT AND OZONE RESISTANT |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 2ND END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQBD |
BURST TEST PRESSURE |
12000.0 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
AIR SINGLE RESPONSE AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQJX |
NOMINAL THREAD SIZE |
0.875 INCHES 2ND END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END |
| CRFY |
FLOW ANGLE |
45.0 DEGREES 1ST END |
| AHNC |
CONNECTION STYLE |
FLARED 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER BRAIDED STEEL WIRE ERR-100 |
| CBBL |
FEATURES PROVIDED |
ELECTROSTATIC DISCHARGE CAPABILITY |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END |
| ABKV |
OUTSIDE DIAMETER |
0.969 INCHES NOMINAL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER ERR-100 |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED STEEL WIRE ERR-100 |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| AAJD |
THREAD CLASS |
2B 1ST END |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM OR COMPLETE FITTING ZINC |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
7.000 INCHES |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |