| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
ERR-070 |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 2ND END |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
ERR-070 |
| TEST |
TEST DATA DOCUMENT |
89372-HE271-5005 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| CRSM |
VACUUM IN TORR |
406.4 |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
7.375 INCHES |
| CRXX |
MEASURING METHOD AND LENGTH |
9.210 INCHES NOMINAL EXCLUDING END FITTINGS |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 2ND END |
| CRFY |
FLOW ANGLE |
74.5 DEGREES 1ST END |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1250.0 POUNDS PER SQUARE INCH |
| FEAT |
SPECIAL FEATURES |
1ST END ELBOW TUBE HAS HOLE DRILLED AND MACHINED TO ACCOMODATE 1/4 IN. TUBE BOSS CONNECTION |
| CQJX |
NOMINAL THREAD SIZE |
1.312 INCHES 1ST END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 275.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
ERR-070 |
| CQBD |
BURST TEST PRESSURE |
3500.0 POUNDS PER SQUARE INCH |
| CBBL |
FEATURES PROVIDED |
ELECTROSTATIC DISCHARGE CAPABILITY |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
2500.0 POUNDS PER SQUARE INCH |
| AAJP |
OUTSIDE SURFACE TREATMENT |
PASSIVATED |
| ABKV |
OUTSIDE DIAMETER |
1.109 INCHES NOMINAL |
| CQJX |
NOMINAL THREAD SIZE |
1.312 INCHES 2ND END |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL MIL-H-27267,SIZE -16Z SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AAJD |
THREAD CLASS |
3B 2ND END |
| CMLP |
THREAD QUANTITY PER INCH |
12 1ST END |
| AARX |
INSIDE DIAMETER |
0.875 INCHES NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNJ 1ST END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
ERR-070 |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| MEDA |
MEDIA FOR WHICH DESIGNED |
AIR SINGLE RESPONSE AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE AND HYDRAULIC FLUID SINGLE RESPONSE AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| ADKX |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG |
180.0 |
| THSD |
THREAD SERIES DESIGNATOR |
UNJ 2ND END |
| CMLP |
THREAD QUANTITY PER INCH |
12 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |