| ADLG |
FIRST END FITTING SPEC/STD DATA |
MIL MS27025-11 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
ERR-070 |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| FEAT |
SPECIAL FEATURES |
FURNISHED WITHA COUPLING CAP AND A COUPLING PLUG |
| CRDW |
HYDROSTATIC TEST PRESSURE |
380.0 POUNDS PER SQUARE INCH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED FIBER ERR-100 |
| ADLP |
QUICK DISCONNECT NOMINAL SIZE |
2.000 INCHES 1ST END |
| ADLP |
QUICK DISCONNECT NOMINAL SIZE |
2.000 INCHES 2ND END |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AWLS |
CONNECTION TYPE |
INTERNAL QUICK DISCONNECT 1ST END |
| AHNC |
CONNECTION STYLE |
CAM OR LEVER (EXTERNAL) 2ND END |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
FUEL RESISTANT |
| ABKV |
OUTSIDE DIAMETER |
2.563 INCHES NOMINAL |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
ERR-070 |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| ABJH |
TEMP RATING |
-55.0 DEG FAHRENHEIT SINGLE RESPONSE AND 75.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
ERR-070 OR ERR-070 |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MILMIL-H-26521,SIZE 2 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER BRAIDED FIBER ERR-100 |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AHNC |
CONNECTION STYLE |
CAM OR LEVER (INTERNAL) 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
NIPPLE ALUMINUM ALLOY, QQ-A-601, ALLOY 40E, TEMPER T5 OR NIPPLE ALUMINUM ALLOY, QQ-A-601, ALLOY 356, TEMPER T6 |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
MIL MS27021-11 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CQBD |
BURST TEST PRESSURE |
950.0 POUNDS PER SQUARE INCH |
| CRXX |
MEASURING METHOD AND LENGTH |
594.000 INCHES MINIMUM OVERALL AND 606.000 INCHES MAXIMUM OVERALL |
| AWLS |
CONNECTION TYPE |
EXTERNAL QUICK DISCONNECT 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, CHLOROPRENE ERR-100 |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
NIPPLE ANODIZED, MIL-A-8625, TYPE 2 |
| AARX |
INSIDE DIAMETER |
2.000 INCHES NOMINAL |