| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
ERR-070 |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AHNX |
BOLT HOLE DIAMETER |
0.205 INCHES NOMINAL 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1000.0 POUNDS PER SQUARE INCH |
| AHNX |
BOLT HOLE DIAMETER |
0.205 INCHES NOMINAL 2ND END |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 1ST END |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
ERR-070 |
| ABKU |
FLANGE THICKNESS |
0.297 INCHES NOMINAL 1ST END |
| CTCJ |
FLANGE STYLE |
RECTANGULAR (INCLUDES SQUARE) 1ST END |
| ABKU |
FLANGE THICKNESS |
0.297 INCHES NOMINAL 2ND END |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
1.656 INCHES NOMINAL 1ST END |
| AJEE |
RAISED FACE DIAMETER |
1.844 INCHES NOMINAL 1ST END |
| ADKX |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG |
30.0 |
| AJEE |
RAISED FACE DIAMETER |
1.844 INCHES NOMINAL 2ND END |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
1.656 INCHES NOMINAL 2ND END |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 2ND END |
| CTCJ |
FLANGE STYLE |
RECTANGULAR (INCLUDES SQUARE) 2ND END |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| AARX |
INSIDE DIAMETER |
1.125 INCHES NOMINAL |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
MIL MS27058 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AWLS |
CONNECTION TYPE |
RAISED FACE FLANGE 1ST END |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| CRXX |
MEASURING METHOD AND LENGTH |
21.500 INCHES NOMINAL WORKING |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AWLS |
CONNECTION TYPE |
RAISED FACE FLANGE 2ND END |
| ABKV |
OUTSIDE DIAMETER |
1.359 INCHES NOMINAL |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END |
| AFQN |
FLANGE LENGTH |
2.188 INCHES NOMINAL 1ST END |
| CRFY |
FLOW ANGLE |
45.0 DEGREES 1ST END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
ERR-070 |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| AFQN |
FLANGE LENGTH |
2.188 INCHES NOMINAL 2ND END |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
11.000 INCHES |
| AAJP |
OUTSIDE SURFACE TREATMENT |
PASSIVATED |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
1.656 INCHES NOMINAL 1ST END |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
1.656 INCHES NOMINAL 2ND END |
| AECS |
BOLT HOLE QUANTITY |
4 1ST END |
| AGFF |
FLANGE WIDTH |
2.188 INCHES NOMINAL 1ST END |
| AECS |
BOLT HOLE QUANTITY |
4 2ND END |
| AGFF |
FLANGE WIDTH |
2.188 INCHES NOMINAL 2ND END |
| AHNC |
CONNECTION STYLE |
RAISED 1ST END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CQBD |
BURST TEST PRESSURE |
4000.0 POUNDS PER SQUARE INCH |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AHNC |
CONNECTION STYLE |
RAISED 2ND END |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
MIL MS27056 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AJED |
RAISED FACE HEIGHT |
0.020 INCHES NOMINAL 1ST END |
| AJED |
RAISED FACE HEIGHT |
0.020 INCHES NOMINAL 2ND END |