| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
ERR-070 |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CRXX |
MEASURING METHOD AND LENGTH |
39.000 INCHES NOMINAL WORKING |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1000.0 POUNDS PER SQUARE INCH |
| AHNX |
BOLT HOLE DIAMETER |
0.205 INCHES NOMINAL 2ND END |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
SOLVENT RESISTANT AND ACID RESISTANT AND OIL RESISTANT AND FUEL RESISTANT AND ALCOHOL RESISTANT AND SALT WATER RESISTANT |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
1.156 INCHES NOMINAL 2ND END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| AJEE |
RAISED FACE DIAMETER |
1.156 INCHES NOMINAL 2ND END |
| AFQN |
FLANGE LENGTH |
1.610 INCHES NOMINAL 2ND END |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 2ND END |
| CQJX |
NOMINAL THREAD SIZE |
1.062 INCHES 1ST END |
| CTCJ |
FLANGE STYLE |
RECTANGULAR (INCLUDES SQUARE) 2ND END |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
UN 1ST END |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
MIL MS27057-12C STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| ADKX |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG |
317.0 |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
6.500 INCHES |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AWLS |
CONNECTION TYPE |
RAISED FACE FLANGE 2ND END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
2000.0 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END |
| ABKV |
OUTSIDE DIAMETER |
0.789 INCHES NOMINAL |
| ABKU |
FLANGE THICKNESS |
0.375 INCHES NOMINAL 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
ERR-070 |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CRFY |
FLOW ANGLE |
45.0 DEGREES 2ND END |
| CBBL |
FEATURES PROVIDED |
ELECTROSTATIC DISCHARGE CAPABILITY |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
1.156 INCHES NOMINAL 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQBD |
BURST TEST PRESSURE |
5000.0 POUNDS PER SQUARE INCH |
| AECS |
BOLT HOLE QUANTITY |
4 1ST END |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL MIL-H-27267 SIZE 12 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CMLP |
THREAD QUANTITY PER INCH |
12 1ST END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
ERR-070 |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| ABJH |
TEMP RATING |
-67.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AJED |
RAISED FACE HEIGHT |
0.093 INCHES NOMINAL 2ND END |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
MIL MS27056-12C STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AARX |
INSIDE DIAMETER |
0.625 INCHES NOMINAL |
| CRSM |
VACUUM IN TORR |
254.0 |
| AHNC |
CONNECTION STYLE |
RAISED SWIVEL 2ND END |
| AGFF |
FLANGE WIDTH |
1.610 INCHES NOMINAL 2ND END |