| CRXX |
MEASURING METHOD AND LENGTH |
120.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
MIL-C-27487 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| ABKV |
OUTSIDE DIAMETER |
2.625 INCHES NOMINAL |
| CRDW |
HYDROSTATIC TEST PRESSURE |
175.0 POUNDS PER SQUARE INCH |
| CQGM |
MAXIMUM OPERATING PRESSURE |
120.0 POUNDS PER SQUARE INCH |
| ADLP |
QUICK DISCONNECT NOMINAL SIZE |
2.000 INCHES 1ST END |
| ADLP |
QUICK DISCONNECT NOMINAL SIZE |
2.000 INCHES 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER RUBBER IMPREGNATED COTTON FABRIC ERR-100 |
| CRSM |
VACUUM IN TORR |
508.0 |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AWLS |
CONNECTION TYPE |
INTERNAL QUICK DISCONNECT 1ST END |
| AHNC |
CONNECTION STYLE |
CAM OR LEVER (EXTERNAL) 2ND END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING ALUMINUM ALLOY |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, BUNA-N |
| CQBD |
BURST TEST PRESSURE |
400.0 POUNDS PER SQUARE INCH |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
MIL-C-27487 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AHNC |
CONNECTION STYLE |
CAM OR LEVER (INTERNAL) 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-H-27516 GOVERNMENT SPECIFICATION |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER RUBBER IMPREGNATED COTTON FABRIC ERR-100 |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER WRAPPED RUBBER, CHLOROPRENE ERR-100 |
| AWLS |
CONNECTION TYPE |
EXTERNAL QUICK DISCONNECT 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING ALUMINUM ALLOY |
| AARX |
INSIDE DIAMETER |
2.000 INCHES NOMINAL |