| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC ERR-100 |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 1ST END |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABMH |
RECESS DEPTH |
0.195 INCHES NOMINAL 1ST END |
| ABMH |
RECESS DEPTH |
0.195 INCHES NOMINAL 2ND END |
| ABKU |
FLANGE THICKNESS |
0.325 INCHES NOMINAL 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
14.200 INCHES NOMINAL WORKING |
| ABKU |
FLANGE THICKNESS |
0.325 INCHES NOMINAL 2ND END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
10.000 INCHES |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 2ND END |
| AEPR |
FLANGE OUTSIDE DIAMETER |
1.750 INCHES NOMINAL 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER RUBBER IMPREGNATED FABRIC ERR-100 |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| AEPR |
FLANGE OUTSIDE DIAMETER |
1.750 INCHES NOMINAL 2ND END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| AHNC |
CONNECTION STYLE |
RECESSED W/GASKET GROOVE 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC ERR-100 |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CTCJ |
FLANGE STYLE |
ROUND W/ OUT BOLT HOLES 1ST END |
| ABKV |
OUTSIDE DIAMETER |
1.440 INCHES NOMINAL |
| AWLS |
CONNECTION TYPE |
RECESSED FLANGE 1ST END |
| AHNC |
CONNECTION STYLE |
RECESSED W/GASKET GROOVE 2ND END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END |
| CTCJ |
FLANGE STYLE |
ROUND W/ OUT BOLT HOLES 2ND END |
| CRFY |
FLOW ANGLE |
45.0 DEGREES 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| AWLS |
CONNECTION TYPE |
RECESSED FLANGE 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
4TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC ERR-100 |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
3RD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC ERR-100 |
| CQGM |
MAXIMUM OPERATING PRESSURE |
5000.0 POUNDS PER SQUARE INCH |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM |
| ABMD |
RECESS DIAMETER |
0.815 INCHES NOMINAL 1ST END |
| ABMD |
RECESS DIAMETER |
0.815 INCHES NOMINAL 2ND END |
| CQBD |
BURST TEST PRESSURE |
20000.0 POUNDS PER SQUARE INCH |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AARX |
INSIDE DIAMETER |
0.750 INCHES NOMINAL |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| ADKX |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG |
180.0 |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM |