| ABKV |
OUTSIDE DIAMETER |
1.078 INCHES MINIMUM AND 1.140 INCHES MAXIMUM |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
ERR-070 |
| CRXX |
MEASURING METHOD AND LENGTH |
28.250 INCHES MINIMUM WORKING AND 28.750 INCHES MAXIMUM WORKING |
| CQRB |
SEAT ANGLE |
7.0 DEGREES 1ST END |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, FLARELESS 1ST END |
| CQRB |
SEAT ANGLE |
7.0 DEGREES 2ND END |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, FLARELESS 2ND END |
| CQJX |
NOMINAL THREAD SIZE |
1.375 INCHES 1ST END |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
MS27383-16 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
ERR-070 |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF 1ST END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
7.375 INCHES |
| CQJX |
NOMINAL THREAD SIZE |
1.375 INCHES 2ND END |
| ABJH |
TEMP RATING |
275.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ADKX |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG |
220.0 |
| CBBL |
FEATURES PROVIDED |
REUSABLE END FITTINGS |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
MS27382-16 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| THSD |
THREAD SERIES DESIGNATOR |
UNEF 2ND END |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1250.0 POUNDS PER SQUARE INCH |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| CRFY |
FLOW ANGLE |
45.0 DEGREES 1ST END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
ERR-070 |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
2500.0 POUNDS PER SQUARE INCH |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-27267,SIZE 16 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CQBD |
BURST TEST PRESSURE |
5000.0 POUNDS PER SQUARE INCH |
| AAJD |
THREAD CLASS |
3B 2ND END |
| AARX |
INSIDE DIAMETER |
0.851 INCHES MINIMUM AND 0.906 INCHES MAXIMUM |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
ERR-070 |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS8001 GOVERNMENT STANDARD |