| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ABKU |
FLANGE THICKNESS |
0.500 INCHES NOMINAL 2ND END |
| ADJL |
INNER CONVEYING TUBE STYLE |
ANNULAR CLOSE-PITCH CORRUGATED |
| ABKG |
BOLT CIRCLE DIAMETER |
3.875 INCHES NOMINAL 1ST END |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 1ST END |
| ABKG |
BOLT CIRCLE DIAMETER |
3.125 INCHES NOMINAL 2ND END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
13.000 INCHES |
| CRXX |
MEASURING METHOD AND LENGTH |
31.500 INCHES NOMINAL WORKING |
| AJEE |
RAISED FACE DIAMETER |
2.875 INCHES NOMINAL 1ST END |
| AEPR |
FLANGE OUTSIDE DIAMETER |
4.250 INCHES NOMINAL 2ND END |
| FEAT |
SPECIAL FEATURES |
A 90 DEG ELBOW IS LOCATED 16.031 IN. FROM FIRST END AND 15.469 IN. FROM SECOND END |
| AJED |
RAISED FACE HEIGHT |
0.133 INCHES NOMINAL 2ND END |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 2ND END |
| CRDW |
HYDROSTATIC TEST PRESSURE |
200.0 POUNDS PER SQUARE INCH |
| CTCJ |
FLANGE STYLE |
ROUND W/ BOLT HOLES 1ST END |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| AJED |
RAISED FACE HEIGHT |
0.140 INCHES NOMINAL 1ST END |
| AWLS |
CONNECTION TYPE |
RAISED FACE FLANGE 1ST END |
| AJEE |
RAISED FACE DIAMETER |
2.000 INCHES NOMINAL 2ND END |
| ABJH |
TEMP RATING |
400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CTCJ |
FLANGE STYLE |
ROUND W/ BOLT HOLES 2ND END |
| AWLS |
CONNECTION TYPE |
RAISED FACE FLANGE 2ND END |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
NICKEL-COPPER ALLOY, QQ-N-281, CLASS A |
| AEPR |
FLANGE OUTSIDE DIAMETER |
5.000 INCHES NOMINAL 1ST END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END |
| CRFY |
FLOW ANGLE |
45.0 DEGREES 1ST END |
| ABKV |
OUTSIDE DIAMETER |
2.359 INCHES NOMINAL |
| CQBD |
BURST TEST PRESSURE |
400.0 POUNDS PER SQUARE INCH |
| CQGM |
MAXIMUM OPERATING PRESSURE |
100.0 POUNDS PER SQUARE INCH |
| AHNX |
BOLT HOLE DIAMETER |
0.625 INCHES NOMINAL 1ST END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| AHNX |
BOLT HOLE DIAMETER |
0.625 INCHES NOMINAL 2ND END |
| AARX |
INSIDE DIAMETER |
1.500 INCHES NOMINAL |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, QQ-S-763, CLASS 316 |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| AECS |
BOLT HOLE QUANTITY |
4 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| AECS |
BOLT HOLE QUANTITY |
4 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED NICKEL COPPER ALLOY WIRE |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, QQ-S-763, CLASS 316 |
| ADKX |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG |
105.0 |
| AHNC |
CONNECTION STYLE |
RAISED SWIVEL 1ST END |
| AHNC |
CONNECTION STYLE |
RAISED SWIVEL 2ND END |
| ABKU |
FLANGE THICKNESS |
0.500 INCHES NOMINAL 1ST END |