| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| CRXX |
MEASURING METHOD AND LENGTH |
27.300 INCHES NOMINAL WORKING |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ADUY |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH |
1.688 INCHES NOMINAL 2ND END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
500.0 POUNDS PER SQUARE INCH |
| CQBD |
BURST TEST PRESSURE |
1000.0 POUNDS PER SQUARE INCH |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
MS20756-20 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, QQ-S-763, CLASS 304 |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| AJEE |
RAISED FACE DIAMETER |
1.854 INCHES NOMINAL 2ND END |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 2ND END |
| CTCJ |
FLANGE STYLE |
RECTANGULAR (INCLUDES SQUARE) 2ND END |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| AARX |
INSIDE DIAMETER |
1.125 INCHES NOMINAL |
| AGAV |
END ITEM IDENTIFICATION |
GRUMMAN A-10 AIRCRAFT |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AWLS |
CONNECTION TYPE |
RAISED FACE FLANGE 2ND END |
| ABKV |
OUTSIDE DIAMETER |
1.359 INCHES NOMINAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| FEAT |
SPECIAL FEATURES |
SILICONE COATED FIBERGLASS SLEEVE |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ACID RESISTANT AND ETHYLENE GLYCOL RESISTANT AND FUEL RESISTANT AND OIL RESISTANT AND ALCOHOL RESISTANT AND SOLVENT RESISTANT |
| AJED |
RAISED FACE HEIGHT |
0.063 INCHES NOMINAL 2ND END |
| CQQN |
EXTERNAL PROTECTION TYPE AND LOCATION |
BOTH ENDS FIRE SHIELD, SILICONE RUBBER |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
11.000 INCHES |
| ZZZV |
FSC APPLICATION DATA |
AIRCRAFT MODEL A-10A |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, QQ-S-763, CLASS 304 |
| CQJX |
NOMINAL THREAD SIZE |
1.625 INCHES 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CMLP |
THREAD QUANTITY PER INCH |
12 1ST END |
| AECS |
BOLT HOLE QUANTITY |
4 2ND END |
| AHNX |
BOLT HOLE DIAMETER |
0.266 INCHES NOMINAL 2ND END |
| THSD |
THREAD SERIES DESIGNATOR |
UNJ 1ST END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AGFF |
FLANGE WIDTH |
2.688 INCHES NOMINAL 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| ABKU |
FLANGE THICKNESS |
0.234 INCHES NOMINAL 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| ADUZ |
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH |
1.688 INCHES NOMINAL 2ND END |
| AHNC |
CONNECTION STYLE |
RAISED SWIVEL 2ND END |
| AFQN |
FLANGE LENGTH |
2.688 INCHES NOMINAL 2ND END |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |