| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CRFY |
FLOW ANGLE |
24.0 DEGREES 2ND END |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER SPIRALLY LAID CORROSION RESISTANT STEEL WIRE |
| AAJD |
THREAD CLASS |
3A 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 2ND END |
| CQRB |
SEAT ANGLE |
51.0 DEGREES 2ND END AND 55.0 DEGREES 2ND END |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
INCLUDED |
| CRDW |
HYDROSTATIC TEST PRESSURE |
6000.0 POUNDS PER SQUARE INCH |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| CQBD |
BURST TEST PRESSURE |
12000.0 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
0.422 INCHES 1ST END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
0.422 INCHES 2ND END |
| ABKV |
OUTSIDE DIAMETER |
0.505 INCHES NOMINAL |
| ABJH |
TEMP RATING |
-45.0 DEG FAHRENHEIT SINGLE RESPONSE AND 450.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| AAJD |
THREAD CLASS |
3A 2ND END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
150.0 POUNDS PER SQUARE INCH |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AARX |
INSIDE DIAMETER |
0.485 INCHES NOMINAL |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CQRB |
SEAT ANGLE |
36.3 DEGREES 1ST END AND 37.0 DEGREES 1ST END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CRXX |
MEASURING METHOD AND LENGTH |
9.250 INCHES NOMINAL OVERALL |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT WITH LOOSE OR INTEGRAL CLINCH SLEEVE 2ND END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
4.625 INCHES |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |