| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED COTTON CORD ERR-100 |
| CQGM |
MAXIMUM OPERATING PRESSURE |
2000.0 POUNDS PER SQUARE INCH |
| CQBD |
BURST TEST PRESSURE |
8000.0 POUNDS PER SQUARE INCH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER BRAIDED WIRE ERR-100 |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
MS28741-8-6000 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| FEAT |
SPECIAL FEATURES |
PLUG AND WIRE ROPE ASSY,NIPPLE,REDUCER BUSHING,COUPLING HALF QUICK DISCONNECT,CAM-LOCKING TYPE,MALE,INTERNAL PIPE THREAD,TYPE 1 CL 1 SIZE 1 AL ALY ANDZ,COUPLING HALF QUICKDISCONNECT,CAM-LOCKING TYPE,CAP,DUST,TYPE 9 CL 1 SIZE 1 AL ALY ANDZ |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
OIL RESISTANT |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
INCLUDED |
| CRSM |
VACUUM IN TORR |
50.8 |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER WRAPPED RUBBER, SYNTHETIC ERR-100 |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING ALUMINUM ALLOY, QQ-A-225/6, ALLOY 2024 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ANODIZED, MIL-A-8625 |
| AAJD |
THREAD CLASS |
3B 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
-1L-H-8794-8 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| MEDA |
MEDIA FOR WHICH DESIGNED |
HYDRAULIC FLUID SINGLE RESPONSE AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| AARX |
INSIDE DIAMETER |
0.406 INCHES MINIMUM AND 0.437 INCHES MAXIMUM |
| ABKV |
OUTSIDE DIAMETER |
0.743 INCHES MINIMUM AND 0.789 INCHES MAXIMUM |
| CRDW |
HYDROSTATIC TEST PRESSURE |
4000.0 POUNDS PER SQUARE INCH |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CQJX |
NOMINAL THREAD SIZE |
0.750 INCHES 1ST END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
4.625 INCHES |
| CRXX |
MEASURING METHOD AND LENGTH |
600.000 INCHES NOMINAL WORKING |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |