| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, COMPRESSION 1ST END |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, COMPRESSION 2ND END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
3000.0 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| AARX |
INSIDE DIAMETER |
0.250 INCHES MINIMUM AND 0.300 INCHES MAXIMUM |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 2ND END |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| ADJS |
EXTERIOR COLOR |
NATURAL OR SILVER |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
INCLUDED |
| CRDW |
HYDROSTATIC TEST PRESSURE |
6000.0 POUNDS PER SQUARE INCH |
| CWBZ |
SEAT NOMINAL RADIUS |
0.047 INCHES 1ST END |
| CQBD |
BURST TEST PRESSURE |
12000.0 POUNDS PER SQUARE INCH |
| CQJX |
NOMINAL THREAD SIZE |
0.500 INCHES 2ND END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 275.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| AAJD |
THREAD CLASS |
3B 2ND END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING PASSIVATED |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
INCLUDED |
| CWBZ |
SEAT NOMINAL RADIUS |
0.062 INCHES 2ND END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE OR PLASTIC, TETRAFLUOROETHYLENE REINFORCED |
| ABKV |
OUTSIDE DIAMETER |
0.540 INCHES MINIMUM AND 0.590 INCHES MAXIMUM |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, FED STD 66, AISI 321/SAE 30321 |
| CRXX |
MEASURING METHOD AND LENGTH |
23.000 INCHES MINIMUM WORKING AND 23.312 INCHES MAXIMUM WORKING |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, FED STD 66, AISI 321/SAE 30321 |
| CQJX |
NOMINAL THREAD SIZE |
0.562 INCHES 1ST END |