| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AARX |
INSIDE DIAMETER |
0.500 INCHES NOMINAL |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 2ND END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
2000.0 POUNDS PER SQUARE INCH |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
OIL RESISTANT AND WEATHERPROOF |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQBD |
BURST TEST PRESSURE |
8000.0 POUNDS PER SQUARE INCH |
| ABKV |
OUTSIDE DIAMETER |
0.910 INCHES NOMINAL |
| CQJX |
NOMINAL THREAD SIZE |
0.500 INCHES 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
0.750 INCHES 2ND END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ZINC W/CHROMATE |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL BOSS 2ND END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, SYNTHETIC ERR-100 |
| CRXX |
MEASURING METHOD AND LENGTH |
26.000 INCHES NOMINAL WORKING |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| AHNC |
CONNECTION STYLE |
SWIVEL, PLAIN 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| AAJD |
THREAD CLASS |
3A 2ND END |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL PIPE 1ST END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| ADJS |
EXTERIOR COLOR |
BLACK |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ZINC W/CHROMATE |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED STEEL WIRE ERR-100 |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CRDW |
HYDROSTATIC TEST PRESSURE |
4000.0 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
SAE J517,100R1,TYPE A-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
7.000 INCHES |
| THSD |
THREAD SERIES DESIGNATOR |
NPTF 1ST END |
| AHNC |
CONNECTION STYLE |
SWIVEL, EXTERNAL SEAT FOR GASKET SEAL 2ND END |