| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| ABKV |
OUTSIDE DIAMETER |
0.597 INCHES MINIMUM AND 0.635 INCHES MAXIMUM |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL TUBE 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED FABRIC ERR-100 |
| CQJX |
NOMINAL THREAD SIZE |
0.625 INCHES 2ND END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1000.0 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 2ND END |
| ABJH |
TEMP RATING |
-55.0 DEG FAHRENHEIT SINGLE RESPONSE AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER RUBBER IMPREGNATED COTTON FABRIC ERR-100 |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-H-13444C,AMEND-3 GOVERNMENT SPECIFICATION |
| AAJD |
THREAD CLASS |
3A 1ST END |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM, QQ-P-416, TYPE 2, CLASS 2 OR COMPLETE FITTING ZINC, QQ-Z-325, TYPE 2, CLASS 2 |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-13444 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| AHNC |
CONNECTION STYLE |
INVERTED FLARE 1ST END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL TUBE 1ST END |
| AHNC |
CONNECTION STYLE |
INVERTED FLARE 2ND END |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
OIL RESISTANT AND MILDEW RESISTANT AND FUEL RESISTANT AND OZONE RESISTANT |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CRDW |
HYDROSTATIC TEST PRESSURE |
2000.0 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
1.250 INCHES |
| AAJD |
THREAD CLASS |
3A 2ND END |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, NITRILE |
| CQRB |
SEAT ANGLE |
45.0 DEGREES 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM, QQ-P-416, TYPE 2, CLASS 2 OR COMPLETE FITTING ZINC, QQ-Z-325, TYPE 2, CLASS 2 |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
3 TYPE |
| CQRB |
SEAT ANGLE |
45.0 DEGREES 2ND END |
| CRXX |
MEASURING METHOD AND LENGTH |
32.000 INCHES NOMINAL OVERALL |
| AARX |
INSIDE DIAMETER |
0.313 INCHES NOMINAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CQJX |
NOMINAL THREAD SIZE |
0.625 INCHES 1ST END |
| CQBD |
BURST TEST PRESSURE |
4000.0 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| FEAT |
SPECIAL FEATURES |
FURNISHED WITH ONE IDENTIFICATION BAND |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |