| MEDA |
MEDIA FOR WHICH DESIGNED |
HYDRAULIC FLUID SINGLE RESPONSE AND FUEL/OIL, HYDROCARBON SINGLE RESPONSE AND OIL, LUBRICATING, DIESTER BASE SINGLE RESPONSE |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT, FLARELESS 1ST END |
| ABKV |
OUTSIDE DIAMETER |
0.640 INCHES NOMINAL |
| CRXX |
MEASURING METHOD AND LENGTH |
15.000 INCHES NOMINAL WORKING |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
12.0 DEGREES 1ST END |
| AAJD |
THREAD CLASS |
3A 1ST END |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AARX |
INSIDE DIAMETER |
0.438 INCHES NOMINAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1250.0 POUNDS PER SQUARE INCH |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ANODIZED, MIL-A-8625 |
| CRFY |
FLOW ANGLE |
45.0 DEGREES 1ST END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
3.500 INCHES |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED CORROSION RESISTANT STEEL WIRE, PARTIAL COVERAGE ERR-100 |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT |
| CRDW |
HYDROSTATIC TEST PRESSURE |
2500.0 POUNDS PER SQUARE INCH |
| ADKX |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG |
90.0 |
| AAJP |
OUTSIDE SURFACE TREATMENT |
PASSIVATED |
| CQBD |
BURST TEST PRESSURE |
5000.0 POUNDS PER SQUARE INCH |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CQJX |
NOMINAL THREAD SIZE |
0.750 INCHES 1ST END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING ALUMINUM ALLOY, QQ-A-225/8, ALLOY 6061, T651 |