| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL TUBE 2ND END |
| CQJX |
NOMINAL THREAD SIZE |
1.875 INCHES 1ST END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
40.000 INCHES |
| CQGM |
MAXIMUM OPERATING PRESSURE |
500.0 POUNDS PER SQUARE INCH |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, BUTADIENE ACRYLONITRILE |
| CQJX |
NOMINAL THREAD SIZE |
1.875 INCHES 2ND END |
| AAJD |
THREAD CLASS |
1A 2ND END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
36.000 INCHES NOMINAL OVERALL |
| THSD |
THREAD SERIES DESIGNATOR |
UN 1ST END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 2ND END |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
SAE J516,STYLE 210143 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ABKV |
OUTSIDE DIAMETER |
2.062 INCHES NOMINAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| THSD |
THREAD SERIES DESIGNATOR |
UN 2ND END |
| AHNC |
CONNECTION STYLE |
FLARED 2ND END |
| CQBD |
BURST TEST PRESSURE |
2000.0 POUNDS PER SQUARE INCH |
| AARX |
INSIDE DIAMETER |
1.500 INCHES NOMINAL |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED STEEL WIRE ERR-100 |
| CMLP |
THREAD QUANTITY PER INCH |
12 1ST END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-13531,TYPE 1,CLASS A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
MILDEW RESISTANT AND OZONE RESISTANT |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJD |
THREAD CLASS |
2B 1ST END |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
SAE J516,STYLE 240143 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, CHLOROPRENE ERR-100 |
| CMLP |
THREAD QUANTITY PER INCH |
12 2ND END |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |