| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQBD |
BURST TEST PRESSURE |
9000.0 POUNDS PER SQUARE INCH |
| CQGM |
MAXIMUM OPERATING PRESSURE |
2000.0 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER RUBBER IMPREGNATED BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD ERR-100 |
| CRXX |
MEASURING METHOD AND LENGTH |
51.500 INCHES NOMINAL OVERALL |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-8794 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ANODIZED, MIL-A-8625, TYPE 2, CLASS 2 |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
4.000 INCHES |
| ZZZK |
SPECIFICATION/STANDARD DATA |
96906-MS28741 GOVERNMENT STANDARD |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
INCLUDED |
| AARX |
INSIDE DIAMETER |
0.312 INCHES NOMINAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, BUNA-N |
| AAJD |
THREAD CLASS |
3B 1ST END |
| ABKV |
OUTSIDE DIAMETER |
0.375 INCHES NOMINAL |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD ERR-100 |
| CRDW |
HYDROSTATIC TEST PRESSURE |
4000.0 POUNDS PER SQUARE INCH |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
MS24587-6 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING ALUMINUM ALLOY |
| CQJX |
NOMINAL THREAD SIZE |
0.562 INCHES 1ST END |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |