| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CRXX |
MEASURING METHOD AND LENGTH |
52.500 INCHES NOMINAL OVERALL |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRDW |
HYDROSTATIC TEST PRESSURE |
5000.0 POUNDS PER SQUARE INCH |
| ABKV |
OUTSIDE DIAMETER |
2.080 INCHES NOMINAL |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
4TH LAYER SPIRALLY WRAPPED STEEL FABRIC ERR-100 |
| AKUT |
END FLANGE CONSTRUCTION |
SOLID 2ND END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
2500.0 POUNDS PER SQUARE INCH |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER SPIRALLY WRAPPED STEEL FABRIC ERR-100 |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ZINC, DICHROMATE TREATED |
| ABKU |
FLANGE THICKNESS |
0.310 INCHES MINIMUM 1ST END AND 0.320 INCHES MAXIMUM 1ST END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, SYNTHETIC ERR-100 |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQBD |
BURST TEST PRESSURE |
10000.0 POUNDS PER SQUARE INCH |
| CTCJ |
FLANGE STYLE |
ROUND W/ OUT BOLT HOLES 1ST END |
| AHNC |
CONNECTION STYLE |
PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 1ST END |
| AEPR |
FLANGE OUTSIDE DIAMETER |
2.365 INCHES MINIMUM 1ST END AND 2.385 INCHES MAXIMUM 1ST END |
| ABKU |
FLANGE THICKNESS |
0.310 INCHES MINIMUM 2ND END AND 0.320 INCHES MAXIMUM 2ND END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END |
| CTCJ |
FLANGE STYLE |
ROUND W/ OUT BOLT HOLES 2ND END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
20.000 INCHES |
| AHNC |
CONNECTION STYLE |
PLAIN W/ GASKET GROOVE (SAE FLANGED HEAD) 2ND END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| AWLS |
CONNECTION TYPE |
PLAIN FACE FLANGE 1ST END |
| ADKX |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG |
90.0 |
| AARX |
INSIDE DIAMETER |
1.500 INCHES NOMINAL |
| AEPR |
FLANGE OUTSIDE DIAMETER |
2.365 INCHES MINIMUM 2ND END AND 2.385 INCHES MAXIMUM 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
3RD LAYER SPIRALLY WRAPPED STEEL FABRIC ERR-100 |
| AWLS |
CONNECTION TYPE |
PLAIN FACE FLANGE 2ND END |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING ZINC, DICHROMATE TREATED |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER SPIRALLY WRAPPED STEEL FABRIC ERR-100 |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CRFY |
FLOW ANGLE |
22.5 DEGREES 1ST END |