| ABKV |
OUTSIDE DIAMETER |
1.750 INCHES MINIMUM AND 1.874 INCHES MAXIMUM |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AARX |
INSIDE DIAMETER |
1.235 INCHES MINIMUM AND 1.297 INCHES MAXIMUM |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
COLD RESISTANT AND OIL RESISTANT AND MILDEW RESISTANT AND OZONE RESISTANT |
| ABJH |
TEMP RATING |
-67.0 DEG FAHRENHEIT SINGLE RESPONSE AND 250.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AHNC |
CONNECTION STYLE |
INVERTED FLARE 1ST END |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-13531B,TYPE I,CLASS A SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, COMPOSITION |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL PIPE 1ST END |
| CQRB |
SEAT ANGLE |
30.0 DEGREES 1ST END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
16.000 INCHES |
| CQJX |
NOMINAL THREAD SIZE |
1.250 INCHES 1ST END |
| CQBD |
BURST TEST PRESSURE |
2500.0 POUNDS PER SQUARE INCH |
| CQGM |
MAXIMUM OPERATING PRESSURE |
625.0 POUNDS PER SQUARE INCH |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED STEEL WIRE ERR-100 |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER MOLDED RUBBER, CHLOROPRENE ERR-100 |
| CRDW |
HYDROSTATIC TEST PRESSURE |
1250.0 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
NPTF 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
127.070 INCHES MINIMUM OVERALL AND 28.030 INCHES MAXIMUM OVERALL |