| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-38360-10 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC ERR-100 |
| CQGM |
MAXIMUM OPERATING PRESSURE |
3000.0 POUNDS PER SQUARE INCH |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81343-AS157 GOVERNMENT STANDARD |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 2ND END |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| CQJX |
NOMINAL THREAD SIZE |
0.875 INCHES 1ST END |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
PLASTIC, POLYTETRAFLUOROETHYLENE |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC ERR-100 |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
6.500 INCHES |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQBD |
BURST TEST PRESSURE |
12000.0 POUNDS PER SQUARE INCH |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
0.875 INCHES 2ND END |
| ABJH |
TEMP RATING |
-67.0 DEG FAHRENHEIT SINGLE RESPONSE AND 400.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| CRFY |
FLOW ANGLE |
45.0 DEGREES 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
4TH LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC ERR-100 |
| CQRB |
SEAT ANGLE |
45.0 DEGREES 1ST END |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
CORROSION RESISTANT |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
3RD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC ERR-100 |
| CQRB |
SEAT ANGLE |
45.0 DEGREES 2ND END |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
AN818-10 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AAJD |
THREAD CLASS |
3B 2ND END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AARX |
INSIDE DIAMETER |
0.562 INCHES NOMINAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ABKV |
OUTSIDE DIAMETER |
0.625 INCHES NOMINAL |
| CRXX |
MEASURING METHOD AND LENGTH |
24.000 INCHES NOMINAL WORKING |
| ADKX |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG |
180.0 |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
AN818-10 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |