| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC ERR-100 |
| CQBD |
BURST TEST PRESSURE |
9000.0 POUNDS PER SQUARE INCH |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
9.500 INCHES |
| ABJH |
TEMP RATING |
-40.0 DEG FAHRENHEIT SINGLE RESPONSE AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQQN |
EXTERNAL PROTECTION TYPE AND LOCATION |
OVERALL SPRING GUARD, ROUND CORROSION RESISTING STEEL COIL |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
1.062 INCHES 1ST END |
| CBBL |
FEATURES PROVIDED |
REUSABLE END FITTINGS |
| THSD |
THREAD SERIES DESIGNATOR |
UN 1ST END |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC ERR-100 |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
42.000 INCHES NOMINAL OVERALL |
| AAJD |
THREAD CLASS |
3B 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| CQCS |
LAYER COMPOSITION AND LOCATION |
3RD LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC ERR-100 |
| AARX |
INSIDE DIAMETER |
0.735 INCHES MINIMUM AND 0.781 INCHES MAXIMUM |
| ABKV |
OUTSIDE DIAMETER |
1.203 INCHES MINIMUM AND 1.265 INCHES MAXIMUM |
| ADLG |
FIRST END FITTING SPEC/STD DATA |
SAE J516,TYPE A-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQGM |
MAXIMUM OPERATING PRESSURE |
2250.0 POUNDS PER SQUARE INCH |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
IDENTICAL |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
OIL RESISTANT AND ABRASION RESISTANT AND MILDEW RESISTANT |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-24135 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CMLP |
THREAD QUANTITY PER INCH |
12 1ST END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER SPIRALLY WRAPPED CORROSION RESISTANT STEEL FABRIC ERR-100 |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |