| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AHNC |
CONNECTION STYLE |
PUSH (EXTERNAL) 2ND END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
2000.0 POUNDS PER SQUARE INCH |
| CQBD |
BURST TEST PRESSURE |
8000.0 POUNDS PER SQUARE INCH |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| ABJH |
TEMP RATING |
-55.0 DEG FAHRENHEIT SINGLE RESPONSE AND 300.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER BRAIDED TEXTILE YARN ERR-100 |
| CBBL |
FEATURES PROVIDED |
REUSABLE END FITTINGS |
| ABKV |
OUTSIDE DIAMETER |
0.520 INCHES NOMINAL |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER BRAIDED POLYESTER CORD ERR-100 |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQJX |
NOMINAL THREAD SIZE |
0.438 INCHES 1ST END |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| FEAT |
SPECIAL FEATURES |
CONSISTS OF TWO HOSE ASSEMBLIES,ONE HOSE ASSEMBLY 72.000 IN.LG. WITH A TEE,THE OTHER ONE IS 24.000 IN.LG. FROM THE TEE END OF THE FIRST HOSE ASSEMBLY |
| AAJD |
THREAD CLASS |
3B 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
0.750 INCHES |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, ETHYLENE PROPYLENE |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| ADLP |
QUICK DISCONNECT NOMINAL SIZE |
0.250 INCHES 2ND END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AARX |
INSIDE DIAMETER |
0.190 INCHES NOMINAL |
| AWLS |
CONNECTION TYPE |
EXTERNAL QUICK DISCONNECT 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| CRXX |
MEASURING METHOD AND LENGTH |
96.000 INCHES NOMINAL EXCLUDING END FITTINGS |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |