| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AARX |
INSIDE DIAMETER |
0.375 INCHES NOMINAL |
| ABKV |
OUTSIDE DIAMETER |
0.843 INCHES NOMINAL |
| CQQN |
EXTERNAL PROTECTION TYPE AND LOCATION |
OVERALL SPRING GUARD, FLAT STEEL COIL |
| ADLH |
SECOND END FITTING SPEC/STD DATA |
SAE J516,TABLE 1B-81343 STANDARD (INCLUDES INDUSTRY OR ASSOCIATION STANDARDS, INDIVIDUAL MANUFACTUREER STANDARDS, ETC.). |
| CQGM |
MAXIMUM OPERATING PRESSURE |
4000.0 POUNDS PER SQUARE INCH |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED EXTERNAL PIPE 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER SPIRALLY LAID STEEL WIRE ERR-100 OR 2ND LAYER BRAIDED STEEL WIRE ERR-100 |
| CRXX |
MEASURING METHOD AND LENGTH |
22.000 INCHES NOMINAL OVERALL |
| CQBD |
BURST TEST PRESSURE |
16000.0 POUNDS PER SQUARE INCH |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
5.000 INCHES |
| ADLF |
HOSE OR TUBING SPEC/STD DATA |
MIL-H-13531,TYPE 2 OR 3 SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| ABJH |
TEMP RATING |
-65.0 DEG FAHRENHEIT SINGLE RESPONSE AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| CQJX |
NOMINAL THREAD SIZE |
0.250 INCHES 2ND END |
| AHNC |
CONNECTION STYLE |
INVERTED FLARE 2ND END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CRDW |
HYDROSTATIC TEST PRESSURE |
8000.0 POUNDS PER SQUARE INCH |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
OIL RESISTANT AND MILDEW RESISTANT AND OIL RESISTANT |
| CQCS |
LAYER COMPOSITION AND LOCATION |
3RD LAYER BRAIDED WIRE ERR-100 OR 3RD LAYER WRAPPED RUBBER, CHLOROPRENE ERR-100 |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
FUEL/OIL, HYDROCARBON SINGLE RESPONSE |
| THSD |
THREAD SERIES DESIGNATOR |
NPT 2ND END |
| THSD |
THREAD SERIES DESIGNATOR |
UNF 1ST END |
| ZZZK |
SPECIFICATION/STANDARD DATA |
81349-MIL-H-13531 GOVERNMENT SPECIFICATION |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| FEAT |
SPECIAL FEATURES |
CAP ENDS PER MIL-C-5501 |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 2ND END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER WRAPPED RUBBER, CHLOROPRENE ERR-100 |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
RUBBER, SYNTHETIC |
| CQJX |
NOMINAL THREAD SIZE |
0.750 INCHES 1ST END |
| CQRB |
SEAT ANGLE |
30.0 DEGREES 2ND END |
| AAJD |
THREAD CLASS |
2B 1ST END |
| ZZZT |
NONDEFINITIVE SPEC/STD DATA |
3 TYPE AND 2 TYPE OR A CLASS |
| CQCS |
LAYER COMPOSITION AND LOCATION |
1ST LAYER SPIRALLY LAID STEEL WIRE ERR-100 OR 1ST LAYER BRAIDED STEEL WIRE ERR-100 |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |