| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 2ND END |
| CQBD |
BURST TEST PRESSURE |
1000.0 POUNDS PER SQUARE INCH |
| CRDW |
HYDROSTATIC TEST PRESSURE |
5000.0 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 1ST END |
| MEDA |
MEDIA FOR WHICH DESIGNED |
GAS SINGLE RESPONSE |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 1ST END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
2.000 INCHES |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 2ND END |
| CRFY |
FLOW ANGLE |
90.0 DEGREES 2ND END |
| CQJX |
NOMINAL THREAD SIZE |
0.375 INCHES 1ST END |
| CQRB |
SEAT ANGLE |
37.0 DEGREES 2ND END |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 1ST END |
| TEST |
TEST DATA DOCUMENT |
00624-AE3819 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| CRFY |
FLOW ANGLE |
45.0 DEGREES 1ST END |
| CQGM |
MAXIMUM OPERATING PRESSURE |
1500.0 POUNDS PER SQUARE INCH |
| CRJM |
OUTER COVERING ENVIRONMENTAL PROTECTION |
ABRASION RESISTANT |
| ADKX |
ANGLE BETWEEN RIGID ELBOW FITTINGS IN DEG |
160.0 |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| CQJX |
NOMINAL THREAD SIZE |
0.438 INCHES 2ND END |
| ABKV |
OUTSIDE DIAMETER |
0.320 INCHES NOMINAL |
| CRXX |
MEASURING METHOD AND LENGTH |
5.625 INCHES NOMINAL WORKING |
| AAJD |
THREAD CLASS |
3B 2ND END |
| CQQN |
EXTERNAL PROTECTION TYPE AND LOCATION |
OVERALL CHAFE GUARD, POLYTETRAFLUOROETHYLENE COIL |
| MARK |
SPECIAL MARKINGS |
TAPE BAND READS:ESCAPE SYSTEM NORMAL-EMPTY;EMERGENCY-HOT GASES |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AARX |
INSIDE DIAMETER |
0.190 INCHES NOMINAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| ZZZK |
SPECIFICATION/STANDARD DATA |
88277-7579263 MANUFACTURERS SPECIFICATION CONTROL |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL, CORROSION RESISTING |
| AHNC |
CONNECTION STYLE |
SWIVEL NUT FLARE 1ST END |