| CRWL |
INSIDE SURFACE CONDITION |
SMOOTH |
| AAGR |
CROSS-SECTIONAL SHAPE STYLE |
ROUND |
| ZZZK |
SPECIFICATION/STANDARD DATA |
53711-5187925 MANUFACTURERS SOURCE CONTROL |
| CQRB |
SEAT ANGLE |
90.0 DEGREES 2ND END |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 1ST END |
| CQJX |
NOMINAL THREAD SIZE |
0.5625 INCHES 1ST END |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 1ST END |
| ABKV |
OUTSIDE DIAMETER |
0.485 INCHES MINIMUM AND 0.525 INCHES MAXIMUM |
| AARX |
INSIDE DIAMETER |
0.292 INCHES MINIMUM AND 0.332 INCHES MAXIMUM |
| CQJX |
NOMINAL THREAD SIZE |
0.5625 INCHES 2ND END |
| ADJM |
INNER CONVEYING TUBE MATERIAL |
SILICONE RUBBER |
| CRDW |
HYDROSTATIC TEST PRESSURE |
200.0 POUNDS PER SQUARE INCH |
| THSD |
THREAD SERIES DESIGNATOR |
UNJF 2ND END |
| CWBZ |
SEAT NOMINAL RADIUS |
0.015 INCHES 1ST END |
| CQBG |
FIRST END SWIVEL ACTION CAPABILITY |
INCLUDED |
| CQGH |
FIRST END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| AHNC |
CONNECTION STYLE |
DOUBLE COMPRESSION 1ST END |
| AHNC |
CONNECTION STYLE |
INVERTED FLARE 2ND END |
| CRBL |
SECOND END FITTING/COMPONENT AND MATERIAL |
COMPLETE FITTING STEEL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 1ST END |
| CRXX |
MEASURING METHOD AND LENGTH |
39.500 INCHES MINIMUM WORKING AND 41.500 INCHES MAXIMUM WORKING |
| ACKH |
MINIMUM INSIDE BENDING RADIUS |
5.500 INCHES |
| AWLS |
CONNECTION TYPE |
THREADED INTERNAL TUBE 2ND END |
| AAJD |
THREAD CLASS |
3B 1ST END |
| CQBD |
BURST TEST PRESSURE |
400.0 POUNDS PER SQUARE INCH |
| CQGM |
MAXIMUM OPERATING PRESSURE |
100.0 POUNDS PER SQUARE INCH |
| CRFY |
FLOW ANGLE |
45.0 DEGREES 2ND END |
| AKUU |
END CONNECTION DESIGN |
ELBOW 2ND END |
| CQCS |
LAYER COMPOSITION AND LOCATION |
OUTER LAYER RUBBER IMPREGNATED BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| CRLL |
SECOND END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM |
| ABJH |
TEMP RATING |
-50.0 DEG FAHRENHEIT SINGLE RESPONSE AND 200.0 DEG FAHRENHEIT SINGLE RESPONSE |
| AAJD |
THREAD CLASS |
3B 2ND END |
| AKUU |
END CONNECTION DESIGN |
STRAIGHT 1ST END |
| CQBB |
SECOND END RELATIONSHIP WITH FIRST END |
NOT IDENTICAL |
| AAJF |
THREAD DIRECTION |
RIGHT-HAND 2ND END |
| CRZY |
SECOND END SWIVEL ACTION CAPABILITY |
NOT INCLUDED |
| CQCS |
LAYER COMPOSITION AND LOCATION |
2ND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE ERR-100 |
| CQHW |
FIRST END FITTING/COMPONENT AND SURFACE TREATMENT |
COMPLETE FITTING CADMIUM |